SET-100擠粒機主要用途
SET-100擠粒機用于醫藥、食品、日化、橡膠助劑、燃料、催化劑等領域。用作粉體濕張擠出制粒。
Main Application:
This machine is widely used in industries such as pharmaceutics, foodstuff, chemical, rubber chemicals, dyestuff and catalyzer . The granulation of power materials are done under wet and extrusion process.
SET-100擠粒機工作原理
螺桿擠出造粒機為雙螺桿,其擠出形式有前擠出和側擠出兩種機型。由驅動、減速、傳動箱及主機等部分組成,加入主機內的濕粉狀物料,在特殊設計的螺桿元件作用下,經輸送壓實,開壓不均壓過程,被送至造粒機頭,并被擠出模板,形成同柱狀的顆粒產品,從而達到造粒的目的。
由于粉狀物料是在濕態下完成擠出制粒過程,使得后續操作過程(如:干燥、包裝等)及操作條件得到大大改善,一般可減少現場粉量90%以上。
Working Principle
The screw extruder pelletizer composed of twin screws. Two models are available according to the form of extrusion, which are front extrusion and side extrusion model. The machine composed of driving part, deceleration part, transmission box and main engine. The wet power materials feed into the main unit is compacted under the specially designed screw elements. When conveyed to the pellet head, the materials are extruded out from the mould plate, and formed into columnar granular products, and therefore achieve granulation purpose.
Since the extrusion and granulation of materials are conducted under wet condition, the condition of the following process (such as drying and packing process, etc.) are greatly improved, with amount of dusts reduced above 90%.
SET-100擠粒機技術參數
Technical Parameters
型號 Model |
SET-60 |
SET-100 |
螺桿直徑 Screw Dia. |
60mm |
100mm |
電動功率 Power |
4kw |
7.5kw |
轉速 Rotating Speed |
11-110r/min |
11-110r/min |
外形尺寸 Overall Size |
1000*450*1000mm |
2000*500*1000mm |
設備重量 Weight |
180kg |
380kg | |